MOTU UltraLite User's Guide download pdf (Page 75)

APPENDIX

B Audio Speciﬁcations

Line Out

Connector Type 1/4” Female, TRS Balanced, tip hot

Output Impedance 100 ohm Per leg

Dynamic Range 117 dB A-weighted

THD+N -101 dB -1 dBFS, Unweighted, 1 kHz

Frequency Response +0, -0.1 dB, 20 Hz/20 kHz Ref. 1 kHz

Max Level Out +20 dBu

Trim Range 24 dB -4 dBu to +20 dBu in 1 dB steps

Guitar In

Connector Type 1/4” Female, TS Unbalanced

Impedance 1 megohm

Dynamic Range 101 dB A-weighted

THD+N -94 dB -1 dBFS, Unweighted

Frequency Response +0.05, -0.1 dB Ref. 1 kHz

Max Level In -2 dBu with trim down, +10 dBu with trim up 0.615v to 2.45v

Trim Range 24 dB -12 dBu to +12 dBu in 1 dB steps

Line In

Connector Type 1/4” Female, TRS Balanced/unbalanced, Tip hot

Specification Complies with EBU-R68 / SMPTE RP-155

Impedance Load 10 k ohm

Dynamic Range 110 dB A-weighted

THD+N -102 dB -1 dBFS, Unweighted

Frequency Response +0, -0.1 dB, 20 Hz/20 kHz Ref. 1 kHz

Max Level In +24 dBu

Trim Range 118 dB -96 dBu to +22 dBu in 1 dB steps

MIC In

Connector Type XLR Male, Balanced Pin 2 hot

Impedance Load 3k ohm, 4.5k with Pad

Pad -20 dB, Switchable per channel

Phantom Power +48v, Switchable per channel DIN 45596 / IEC 61938-P48

EIN -128 dBu, 20 – 20 kHz Rs = 150 ohm

Dynamic Range 112 dB A-weighted

THD+N -104 dB -1 dBFS, Unweighted, 1 kHz

Frequency Response +0, -0.1 dB, 20 Hz/20 kHz Ref. 1 kHz

Max Level In +24 dBu With pad

Trim Range 56 dB 0 to +56 dB in 1dB steps

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 85 86

No comments

MOTU UltraLite User's Guide Page 75