MOTU 8pre User's Guide download pdf (Page 63)

MOTU SMPTE SETUP

RESOLVING DP OR AUDIODESK TO SMPTE

TIME CODE

To resolve your Digital Performer/8pre system

directly to SMPTE time code with no additional

synchronization devices, use the setup shown

below in Figure 12-3. Choose Receive Sync from the

Setup menu and choose the Sample accurate

option. Then make sure that the Slave to External

Sync command in the Studio menu is checked.

Make sure the Clock Source setting in the MOTU

Audio Setup window is set to SMPTE. Also, make

sure that you’ve connected an LTC input signal to

an 8pre analog input, and that you’ve speciﬁed that

input in the SMPTE Setup.

RESOLVING CUBASE OR NUENDO TO

SMPTE TIME CODE

To resolve your 8pre directly to SMPTE time code

with no additional synchronization devices, use

the setup shown in Figure 12-3. Make sure the

Clock Source setting in the MOTU Audio Setup

window is set to SMPTE. Also, make sure that

you’ve connected an LTC input signal to an 8pre

analog input, and that you’ve speciﬁed that input in

the SMPTE Setup.

!8pre Manual/Mac Page 63 Tuesday, October 12, 2010 5:52 PM

1 2 ... 58 59 60 61 62 63 64 65 66 67 68

No comments

MOTU 8pre User's Guide Page 63