MOTU 8pre User's Guide download pdf (Page 58)

CUEMIX FX

Holdoff

Holdoff deﬁnes a time interval during which the

oscilloscope does not trigger. The most recent trace

will be displayed during that period. When the

period is over, the trigger is “re-armed’, i.e. it will

begin looking for the criteria again.

Click and drag this value up or down to set it, or

double-click to return to the default value.

Trig ger mo des

The Trigger menu (Figure 9-14 on page 57)

provides four modes:

Trig ger in di cator

The Trigger indicator (Figure 9-14 on page 57)

displays the state of the trigger, and also provides a

way to manually interact with it. The Trigger

indicator always displays one of three colors:

You can also click on the Trigger indicator to force

certain actions, depending on the Trigger mode. In

Auto and Normal modes, clicking on the Trigger

indicator causes the display to run freely; you may

click & hold to force this to occur for as long as

you’d like. In Single Sweep mode, clicking on the

Trigger indicator re-arms the trigger. When the

Trigger m o de is None, clicking on the Trigger

indicator has no effect.

Measurement information

You can view detailed information about a

particular time range by using the measurement

bars.

Figure 9-15: Measurement information

Trigger mode What it does

None The Trigger is not active; this is the default mode.

The incoming audio signal will be displayed con-

tinuously as audio is received.

Auto The display is always updating, but when the

condition is met, the trigger event will be dis-

played centered around the line marking time

equals zero.

Normal The display updates only when the condition is

met; the last trace will be displayed until the next

matching event is found.

Single Sweep Similar to Normal mode, but the last trace will be

displayed until you manually arm the trigger by

clicking the Trigger indicator (Figure 9-14 on

page 57) or by pressing the spacebar.

Color Status

Green When the current Trigger criteria has been met

(including when the Trigger mode is None).

Yellow When the Trigger is armed, but has not yet found an

event which matches its criteria. Yellow can also indi-

cate that the graph has been manually paused using

the Pause button in the View section (see “Pausing

the display” on page 56).

Red When the Trigger is being held off, either because the

Trigger mode is set to Single Sweep or the Holdoff

time is not set to zero.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 79 80

Comments to this Manuals

No comments

MOTU 8pre User's Guide Page 58

Comments to this Manuals

Related products and manuals for Recording Equipment MOTU 8pre