MOTU 828mkII User's Guide download pdf (Page 55)

828MKII FRONT PANEL OPERATION

state. The Fader View Time option lets you control

how long the adjusted parameter remains on the

LCD after the knob stops turning.

Optical In / Optical Out

These two settings determine the format for the

828mkII’s optical input and output. They are the

same as the optical setting in the MOTU FireWire

Audio Console as explained in “Optical input/

output” on page 44. If the 828mkII is currently

connected to a computer, these settings cannot be

changed from the front-panel LCD. They must be

changed in the MOTU FireWire Audio Console

instead. Or, you can disconnect the 828mkII from

the computer to change them from the front panel.

Bus output

The Bus Output setting lets you choose the

828mkII output pair for each of the four CueMix

DSP mix busses. Turn the SELECT knob to choose

a bus. Turn the VALUE knob to choose an output.

Push the VALUE knob to select the output. The

output stops ﬂashing to conﬁrm that it has been

selected.

Bus mute

The Bus Mute setting mutes and unmutes the bus

output. Turn the SELECT knob to choose a bus.

Push the SELECT knob to mute or unmute the bus.

Phones Assign

The Phones Assign setting lets you choose what you

hear on the headphone output. This is the same as

the Phones setting in the MOTU FireWire Audio

Console as explained in “Phones” on page 44.

Init Current Mix

The Init Current Mix setting lets you reset the

current mix (or all four mixes). All inputs get reset

to unity gain (0 dB), pan c enter, etc.

Copy Bus Mix

Copy Bus Mix lets you copy all of the settings for the

currently displayed mix. Turn the SELECT knob to

choose a mix. Push the SELECT knob to copy it.

Yo u c a n then paste the settings to another mix as

explained below. The word Done appears brieﬂy to

conﬁrm that the mix settings have been

successfully copied.

Paste Bus Mix

After you copy mix settings (explained above),

Paste Bus Mix lets you paste the copied mix settings

to another mix. Turn the SELECT knob to choose a

mix. Push SELECT to paste. The word Done

appears brieﬂy to conﬁrm the paste. The following

mix parameter are included in the paste operation:

Gain, Pan, Solo, Mute, +4/-10, +6dB boost, and

stereo pairing. The following mix parameters are

not pasted: Bus output, Bus mute and Bus gain.

Save/Name Preset

The Save/Name Preset setting lets you name and

save up to sixteen separate 828mkII presets. A

preset holds all of the current CueMix DSP mix

settings for all four mix busses. Setup parameters

are not included. The name can have up to 12

characters. Here is a summary of how to name and

save a preset:

Load preset

After you’ve saved one or more presets, Load Preset

lets you recall them. Turn the SELECT knob to

choose a preset. Push SELECT to load it. The word

Loaded appears brieﬂy to conﬁrm the operation.

To do this: Do this:

To change the currently flashing

character

Turn the VALUE knob

To jump to capital letters, lower

case letters, numbers or symbols

Push the VALUE knob repeat-

edly

To scroll to a different character Turn the CURSOR knob.

To save the preset Push SELECT. If you are asked

to replace existing preset, push

SELECT again to replace it, or

turn it to select a different preset.

!828 Manual/Mac Page 55 Tuesday, May 27, 2003 1:45 PM

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 109 110

Comments to this Manuals

No comments

MOTU 828mkII User's Guide Page 55

Comments to this Manuals

Related products and manuals for Recording Equipment MOTU 828mkII