MOTU 828mkII User's Guide download pdf (Page 57)

828MKII FRONT PANEL OPERATION

Mix parameters that apply across all mixes

The last three mix settings (input reference level,

+6dB software boost, and stereo pairing) apply

across all mixes because they have to do with the

nature of the input itself. For example, if you have

an input that requires a -10dB reference level, then

you’ll want the reference level to apply to all mixes.

Working with stereo pairs

When you group a pair of inputs as a stereo pair, all

of their mix settings become linked, and whenever

you scroll to either channel, both channels will

ﬂash to indicate that they will operate as a linked

stereo pair. Note that when a pair is ﬁrst created,

pan is set to hard left and hard right, but the

channels can then be further modiﬁed indepen-

dently. When a pair is unlinked, the channels are

set to pan-center.

CURSOR / VALUE

When the LCD display is in mixer mode, the

CURSOR knob scrolls left and right over the 20

inputs displayed in the LCD. The current input

ﬂashes. As a shortcut, you can push the CURSOR

knob to toggle between the top row (analog inputs)

and bottom row (digital inputs). The VALUE knob

changes the current mix parameter for the

currently ﬂashing input. In some cases, such as

Gain and Pan, the LCD will “zoom” to the enlarged

horizontal fader while you adjust it with the VALUE

knob. After you stop adjusting, the LCD will return

to the mixer display.

STAND-ALONE OPERATION

All settings, including all mix settings and global

settings, are saved in the 828mkII’s memory, and

they remain in effect even when the 828mkII is not

connected to a computer. This allows you to use the

828mkII as a stand-alone 8-bus mixer. You can

make adjustments to any setting at any time from

the front panel.

!828 Manual/Mac Page 57 Tuesday, May 27, 2003 1:45 PM

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 109 110

No comments

MOTU 828mkII User's Guide Page 57