OTHER MAC OS X AUDIO SOFTWARE
73
TRIMMING THE ANALOG INPUTS
The 896HD analog inputs provide trim knobs on
the front panel. To calibrate an audio input:
1 Record-enable a track in your host software.
2 Choose the desired 896HD input for the track.
3 Open the mixer or other window that displays
the track’s audio input level.
4 As you feed signal to the input, adjust the input’s
corresponding trim knob on the front panel of the
896HD until peaks in the level meter are as high as
possible without clipping (hitting zero dB).
PROCESSING LIVE INPUTS WITH PLUG-INS
If you patch a live input (such as a MIDI
synthesizer) through a plug-in effect in your host
software, you might hear a slight delay. There are
several ways to reduce this delay. For details, see
chapter 11, “Reducing Monitoring Latency”
(page 85).
USING A FOOT SWITCH
Use a foot switch connected to the 896HD to
trigger recording punch-in and punch-out, or any
other feature in your host audio software that is
assigned to a computer keystroke. By default, the
foot switch triggers the 3 key on the computer
keypad. To trigger a different set of keystrokes with
the foot switch, visit the MOTU FireWire Audio
Console. (See “Enable Pedal” on page 43.)
SYNCHRONIZATION
As of this writing, Mac OS X does not allow third-
party applications to take advantage of the
896HD’s sample-accurate sync features. Refer to
www.motu.com for further developments.
However, if most applications that support external
sync will be able to supports the 896HD’s word
clock sync capabilities. Consult chapter 3,
“Installing the 896HD Hardware” (page 15) and
use the synchronization diagrams in that chapter
to synchronize your software and the 896HD to the
other components of your system.
Comments to this Manuals