MOTU Digital Timepiece Instruction Manual download pdf (Page 107)

USING THE FRONT PANEL LCD

105

The MIDI Timepiece AV has eight internal base

setups; each can store its own unique settings. One

of the eight base setups is always active, and it’s

name and number are displayed in the BASE

SETUP window. Any changes you make in any of

the LCD windows are remembered until you

switch to a different base setup. At any time, you

can add changes you’ve made to the current base

setup. Or, you can save the current base setup,

along with the changes, as a different base setup

that replaces one of the eight. (See “Making

changes to a base setup” on page 105.)

Selecting the current base setup

The BASE SETUP window lets you call up one of

the MIDI Timepiece AV’s eight internal base

setups.

To select a base setup:

1 Use the WINDOW knob to go to the BASE

SETUP window.

2 Turn the VALUE knob until you see the name

and number of the desired base setup.

3 Once you have selected the desired base setup,

press the YES/NO button to recall it.

Notice that only one base setup can be called up at

a time.

Making changes to a base setup

To make changes to a base setup:

1 Select the base setup as described in the

previous section.

2 Make any changes you like to the base setup by

using any other windows in the LCD.

You can select modiﬁers, change cable routings, or

anything you want.

3 Use the WINDOW knob to go to the BASE

SETUP NAME window.

It’s the window farthest clockwise.

4 If desired, use the VALUE and CURSOR knobs

to edit the base setup name.

5 Press the ENTER button.

You’ll now see the following window.

6 Make sure that the original base setup appears

in the LCD.

If not, use the VALUE knob to select it. This is

because you are going to replace the original base

setup. (Although, if you want, you can preserve the

original by writing over a different base setup.)

7 When you have selected the base setup you want

to replace, press the YES/NO button.

The new base setup replaces the old one.

Changing the name of a base setup

Use the same procedure as “Making changes to a

base setup” on page 105 to rename a base setup.

WORKING WITH MODIFIERS

A modiﬁer is any command, or set of commands,

that you can program the MIDI Timepiece AV to

do. For example, a modiﬁer could be the command

to “connect input cable 3 to output cable 5”.

Modiﬁers cannot be created or edited in the LCD.

They can, however, be called up in the LCD.

BASE-SETUP 1

Basic Studio YE

WRITE OVER 1

D BaseSetup 1 N

!USB Interfaces Manual Book Page 105 Tuesday, October 10, 2000 12:43 PM

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 155 156

Comments to this Manuals

No comments

MOTU Digital Timepiece Instruction Manual Page 107

Comments to this Manuals

Related products and manuals for Recording Equipment MOTU Digital Timepiece