MOTU Digital Timepiece Instruction Manual download pdf (Page 29)

CHAPTER

5 Working with Presets

OVERVIEW

This chapter describes your MOTU Express

interface’s eight factory presets and explains how

to:

■ Select a factory preset or one of eight user presets

from the front panel

■ Create your own user presets

■ Work with presets in the Express Console

software

■ Select presets using patch changes from any

MIDI source (such as a keyboard controller or

sequencer)

Factory versus user presets . . . . . . . . . . . . . . . . . .27

Selecting a preset on an Express XT . . . . . . . . . .27

Selecting a preset on a micro express . . . . . . . . .27

Factory Presets. . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

User Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Working with presets in Express Console . . . . .30

FACTORY VERSUS USER PRESETS

Your Express interface provides eight factory

presets and eight more user presets. Factory presets

are “hard-wired” and cannot be permanently

changed. If a factory preset is the current preset,

changes you make to your Express interface’s

settings will not be remembered unless you save

them to one of its eight user presets.

The eight user presets can be conﬁgured any way

you wish, and they can be stored in the interface

hardware itself for later recall.

SELECTING A PRESET ON AN EXPRESS XT

To select a preset from the front panel:

1 If you have a MIDI Express XT, press the BANK

button as needed to choose either the factory

preset bank or user preset bank. The Factory Preset

or User Preset LED will become lit.

2 Repeatedly press the SELECT button until the

LED below the program you want lights up.

As you repeatedly press the button, the LED cycles

through the eight programs.

SELECTING A PRESET ON A MICRO EXPRESS

To select a preset from the front panel:

1 Repeatedly press the SELECT button until the

LED for the program you want lights up.

2 The SELECT button cycles through both the

factory and user presets, as indicated by the red

User LED and the green Factory LED.

FACTORY PRESETS

The eight factory presets provide you with

optimum cable routing, SMPTE, and other settings

for various common situations in which you will

use your Express interface. The eight factory preset

settings are listed on the front panel as shown

below:

!USB Interfaces Manual Book Page 27 Tuesday, October 10, 2000 12:43 PM

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 155 156

Comments to this Manuals

No comments

MOTU Digital Timepiece Instruction Manual Page 29

Comments to this Manuals

Related products and manuals for Recording Equipment MOTU Digital Timepiece